Hussars - painted at last!

I have finally got around to casting and painting up a couple of units of hussars. I don't know how everyone else is getting on with these moulds, but I found that they needed a lot of venting before I could get decent castings - they seem to be working fine now.

As I have said in the past I tend to be pretty easy going when it comes to interpreting uniforms, opting for things I fancy rather than strict interpretations; and I used that approach with the hussars.

Prussian Hussar Regiment No.7 - von Malachowski

In assembling the unit I made one significant change; back in 2017 (see post 20/03/2017) Aly Morrison made some heads with a mirliton streamer extended, and I used these heads on my figures. It was not possible for PA to make a head with the streamer trailing due to the pressures exerted on the master figure during manufacturing process (I did ask).

In 1743 Frederick had ordered the hussars to return their standards, however I really like my units to carry flags, so I looked around for an excuse to include one (I think I would have given them one anyway). On February 23 1758 detachments of Ruesch Hussars and Malachowski hussars captured four standards of the French Polleresky Hussards at Stöcken-Drebber and also one from Royal-Cravate Cavalerie at Düffelward on June 2 1758. For these actions, Frederick granted two of the Pollaresky Hussars standards to Malachowski Hussars - so they carry a French standard.

I gave up on trying to paint the dog-tooth edging to the saddle cloth, that amount of detail in yellow on blue was too much like hard work!

Austrian Hussar Regiment No. 10 - Palatinal

Most of the Austrian hussars wore the fur kolback, however as for the Prussians I fancied using Aly Morrison's mirliton heads, so I delved into my reference material to see if I could justify it. Kronoskaff came up trumps, according to the Bautzener Bilderhandschrift, both regiment No. 8 - Dessewffy (H 34) and No. 10 Palatinal (H 36) possibly wore black mirlitons - good enough for me. 

The Austrian officers and trumpeters would probably have worn a frock coat and tricorn, however PA decided not to include that option so the unit will have to make do with the same hussar officer as the Prussians; I did however give the officer a tricorn pinched from the Hungarian infantry. 

Hussar Size Comparison

In response to Ross's request, Peter Michael Prow has cast some figures (I still don't have the moulds) and photographed with the older Rossbach French Hussars (note there are no right arms on the new figures). The photos are on the PA Facebook Page - I have pinched them:

https://www.facebook.com/groups/princeaugust/

The Rossbach figures are the two bottom left. I have cast up a couple of units of the older figures, but personally I do not like the poses so only painted up one of them.

The new figures are more to my taste, and with the variation in horses and arms should make up some nice units.

And close ups with the two horse and head types (I think the officer horse might be different again).

And finally one with the Grenzer head.

If you have any questions please raise them in the comments and hopefully Peter will respond.

New hussars - what moulds are needed?

One of the next things on Prince August's 'to do' list are SYW hussars. There are already a number of hussars in the Rossbach range, however they do not fit in with the new figures, the Prussian one with carbine is actually quite nice, but a little small, whereas the poses in the French moulds are not to my liking.

I don't know when these will be done, however it is worth having a discussion about what is wanted, before the sculptor starts work?

Prussian Hussars

There is only likely to be one set of hussar moulds, so these will need to be able to cast figures for many nations; consider the Prussians as a starting point as I have some nice pictures. 

Within a cavalry units I generally like to have the following figures:

• Officer which is different to the troopers.
• Standard Bearer - hussars did not usually carry standards, but they look good so add one.
• Musician, in this case a trumpeter.
• Trooper.

Uniform and Equipment

In order to cover all 4 figures, one option would be to provide a mould for each, however as there will be separate heads, right arms and carbines this could be done with less moulds, so possibly allowing for more variety in horse poses. Initially just consider two main body types.

Equipped with a wide cross belt. If assembled with a sword arm and carbine hung alongside, this will act as a trooper, alternatively with a suitable arm and no carbine  he would make a standard bearer (as was done in the dragoons, which look fine).

If there is no belt, then with a suitable sword arm he could act as an officer, or alternatively a musician with an arm carrying trumpet.

Heads

For the Prussians there are two types of head required, the kolback and the mirliton, so clearly both of these need to be provided.

Horses

The saddlecloths and leatherwork on the horses of all ranks all look similar (with the 'dog tooth' edging), so the same horses could be used for troopers and command figures.

As the torsos will be attached to the horses we need a minimum of two horse/torso moulds, however for these flamboyant types it might be worth asking PA to produce 3 to add some variety?

For the hussars I think the horses should be in a dynamic pose such as a canter or even a gallop, whilst still trying to maintain some of that 'old school' feel of the old Holger Erikkson figures.

Austrian Hussars

Austrian hussars were very similar to the Prussians, but  with some significant differences.

There were no 'dogs teeth' around the saddlecloth, just a wide stripe, so to be a 'universal' figure it is necessary to change the edging detail.

The Austrian trumpeters had a very distinct uniform, they did not wear the pelisse and kolback/mirliton, instead they wore a long tailed coat and tricorn. 

The undress uniform of the officers was similar (he would make a nice mounted Hungarian officer I suspect).

Russian Hussars

The Russians were again similar but with a couple of differences compared with the Prussians.

The saddle cloth, like the Austrians, they just had the plain striped edging

Reading both Osprey MAA 271 and Kronoskaff it appears they may not have been issued with carbines, although image 1 has a suspension belt to support one, and Kronoskaff states that one source says they had them. On that basis I think I would add them, however if anyone feels strongly enough that they should not carry them, then the whole unit could be made using the officer horse/torso with no cross belt. 

In Conclusion - at last

So after all that waffle, what do I think PA should consider making - I'm not sure how they will sell these - it might be best as a multiple pack like the dragoons?

Horse/torso

All saddle cloths to have simple wide stripe on the edge which will serve Austrians and Russians and act as a guide for the Prussian 'dog tooth'.

1 x Officer/trumpeter horse/torso with no carbine cross belt. This figure can be used for all officers and most musicians. It can also be used for Russians with no carbine, but unit will have little variation.

2 (or perhaps just one) x Trooper/standard with wide carbine/standard belt to be used for troopers and standard bearers. If two poses can be done it will give more variety in the horses. 

1 x Austrian trumpeter/officer horse/torso with no carbine cross belt, this figure is specific for Austrians. (It would possibly also make a Hungarian mounted officer).

Heads

The general requirement is for kolbacks and mirlitons.

The 'Austrian' mould needs a tricorne.

Arms

All arms need to be interchangeable with a round socket to allow the angle to be changed, with:

• Sword pointing ahead in 'charge'.
• Arm bent for standard (to be drilled out)
• Trumpet
• Possibly bent arm with sword?
• Possibly arm with carbine like first picture above?

As always your comments would be appreciated - and listened to.

I do not know when PA will be doing the hussar moulds, however i would be useful to have your thoughts - particularly if you are likely to be wanting to buy the moulds.

Prussian Cuirassiers - Rossbach

I thought I had better write something to let you know I am still around!

Quite understandably, Prince August have gone quiet during the pandemic and  not been able to release the new staff officer and light troops moulds I was looking forward to.

I have painted up a few more cavalry units, but they are just 'more of the same', so nothing worth discussing here. I have however recently had an attempt to make a unit of Prussian cuirassiers. Neither the old Karoliners or new SYW range have anything suitable, so decided to have a look at the old Rossbach range - and spent my hard earned pennies on the 3 Guarde du Corps moulds (trooper, officer and standard).

I was not happy that they fit in 'as cast', so did need a little work..............

As usual I swapped the heads for the Prussian infantry officer from the SYW range. The one on the Rossbach figure is not bad actually, however I decided they would match in better if I changed them.

The troopers have neither a carbine or valise, I decided I could live without the valise, but really wanted a carbine. The figure has the sword low on the right side, just where the carbine hangs. I initially thought that I was scuppered, however after a little experimentation I found that it relatively simple to cut a groove down the back of the sword using a hacksaw blade, and then slot in a slightly filed down carbine from the dragoons.

The Rossbach moulds do not include any musician, and the Karoliner and SYW do not match the style, so the best I could come up with was to cut/file away the whole right arm of an officer figure and replace with the trumpet from the SYW Austrian cuirassier. The Austrian cuirassiers are rather on the large size, so even after some filing down the trumpet arm has a bit of a 'lobster arm' effect, not brilliant but he will do (oops a bit of basing paint to clean off).

Size wise the Rossbach figures are on the small side, see comparison with the Karoliner/SYW Austrians.

I am not overly impressed with the results, and think we really need a a figure adding to the SYW range. However having invested in the moulds I will possibly do one more unit to have some units to put on the table.

More Austrian & Prussian cavalry

Happy New Year to everyone!

Over the festive break I have managed to finish off a few units which have been sitting on the painting table for some months  (they kept being put back as I indulge in my current fads). Excuse the photo quality, they are just taken on an old compact camera under a desk lamp.

Austrian Horse Grenadiers

This is my take on the grenadiers from DR#2 Liechtenstein, as usual I have simplified detail, as I prefer to have them 'neat' rather than 'accurate' (I can't do both), the flag is as usual from Maverick Models.

The horse grenadiers are based on the recent dragoon mould, but with a few modifications:

• The sword arm has been replaced by that from the cuirassiers, as I really do feel this is a better pose - it is a bit oversize but I think looks fine.
• The head is from the earlier infantry moulds, as the the castings I get from the dragoon mould seem very small/flat (I have suggested to PA that they remake the head mould).
• Horse grenadier squadrons had trumpeters rather than the drummers in the rest of the dragoons. I made one using the dragoon officer with the cuirassier trumpeter's arm, it took a bit of filing/bending, and again is a bit big - but I think looks fine.

• To finish off, I added sword hilts to the empty scabbards on the trumpeter and standard bearer (from from the French infantry).

This swapping of parts is what I always wanted for this range, although there are some issues with fit and sizing I must admit I enjoy using the various parts to come up with as close an approximation as I can to the units I want.

Prussian Dragoons

I have also painted up Prussian DR#5, again with a simplified paint job.

I could not resist making a few of modifications:

• The sword arm is again from the cuirassier.
• The heads are all 'Prussian officers' from the infantry moulds, as again I wanted heads which were 'fuller' than those in the dragoon mould.
• A sword hilt was added to the drummer, as it is missing on the casting.

Austrian Cuirassiers

Although the recent PA cuirassiers are very nice figures they really are too big, and having used them on the table a few times I simply cannot live withe the size difference relative to the rest of the army (I'm an engineer).  I have sugegsted to PA that they reprint the cavalry (possibly with torso/horse combined) at the correct scale, however in the meantime I have decided to cast and paint up some cuirassiers based on the Karoliners, with a head 'upgrade' using the Russian Infantry officer's head.

As always comments welcome?

Austrian Sachsen-Gotha Dragoons

Another unit of the new dragoons completed - this time with a little modification.

With arm from cuirassier mould

As mentioned my previous post I am not all that keen on the pose with the sword low down alongside the horse (see below). For this unit I have the sword on the shoulder, using the arm from the cuirassiers. The arm is a little on the large size, but not really noticeable, it also requires a bit of work modifying  the cuff, as the cuirassier has heavy gloves and the dragoon are bare handed.

With arm from dragoon mould

I think I prefer the sword on the shoulder - any thoughts?

Austrian Erzherzog Joseph Dragoons

I have just completed my first 8 man unit of dragoons. These are new figures, so as a change from my usual practice of photographing the assembled unit I thought it worthwhile showing the individual figures.

I have painted them up based on Erzherzog Joseph Dragoons, but with some simplification (for example my hand is not steady enough for multiple lines on the saddle cloth). The figures are mostly as in the mould, but with one main change - I have replaced the heads with  older infantry officers heads, with mustache just painted on where appropriate. I did this primarily because I think the older, hand sculpted heads have better definition on the facial features - and also to maintain continuity with the cavalry I have already converted from the Karoliner range.

Trooper

Apart from the Russian officer's head the only other minor change I have made is to fix the carbine a bit lower than the lug/hole suggested.

I think he is a very fine chap, and the mould will get a lot of use (I have cast 30 so far).

Officer

This time with an Austrian officer's head - another nice figure, who is also going to act as 'Brigadiers' in my army proudly taking command of 3 or 4 units.

(I appreciate the officers saddle cloth should be a different colour - however I had already painted it before I remembered and did not feel inclined to change it.)

Drummer

Dragoons had drummers rather than trumpeters, apart from the head (and sword hilt) this is the standard figure.

I'm sure it would look better if I could paint an eagle on the drum - but these are wargames toys not display figures! Also there should be a sword hilt showing which was forgotten by sculptor, I could have easily corrected it using the hilt of of a sword from elsewhere - but I missed it until too late!

Standard Bearer

And finally the standard bearer. There is no actual figure for the standard bearer (we did not think it warranted an additional mould) - instead an extra arm has been provided to convert either the officer or trooper - I chose the trooper as he has a carbine cross belt which looks very similar to the one to carry a standard (there is also a cartridge box on the back).

The trooper and officer both have drawn swords, whereas for the standard bearer it should still be in the scabbard - I just glued on the hilt of a French sword.

Finished Unit

I have now based them up, so here is the completed unit.

Size Comparison

As discussed previously, the cuirassiers are too big, and do not fit in well with the rest of the SYW figures. To bring the dragoons into scale with the rest of the SYW range they have been plotted 7% smaller than the cuirassiers - I have taken some shots as size comparison.

First of all a comparison with the Austrian infantry. Both the infantryman and dragoon measure about 42mm from heel to top of hat - so that looks fine.

Next a comparison with my converted Karoliners. The Karoliner appears marginally larger, although again the men's heights are about the same - I suspect the difference is the larger head on the Karoliners horse. I think they will look fine together, particularly with the same heads on both figures.

And finally the cuirassiers - I checked it, that really is only 7%!

And as requested by Ross - a couple of shots against the old HE with musketoon.

The new figure is a bit larger and bulkier than the old HE, which is in line with the whole of the  SYW range. Note that I have used the Russian officer's head as I like the look of an almost full round head on the semi-flats (just personal taste), however the heads in the moulds are not quite as wide.

Overall Conclusions

The dragoons are really nice figures, I would have preferred something with a bit more energy, but will still be using them for the bulk of my Austrian and Prussian dragoons.

I have a unit part finished which have the sword arm replaced by the one on the shoulder taken from the cuirassiers - it will be interesting to see if the larger arm really shows up?

As always comments would be appreciated.

Prussian Hussars No.8

I have also had a play, and made a unit based on Prussian Hussar regiment No 8 using the Rossbach moulds.

In the past I have not used these moulds due to the lack of a trumpeter and carbine, however I decided  to buy a pair (in the recent half price sale) to give them a go and add the missing parts from SYW cuirassiers. I cut a bit off of the end of the cuirassiers carbine - but I think it is still a bit too long.

I also made a trumpeter - this was a bit more radical -  I cut/filed off the whole of the arm from the hussar with the raised sword, then glued on a cuirassier trumpet arm (after filing off the swallows nests). The arm is actually on the large size, but close enough.

I suspect there will be a deaf horse if he blows the trumpet, however I tried raising it but it ended poking him in the eye - which looked worse.

Dragoons released

(Updated 01/06/19)

In case you are not on PA's mailing list - they have just announced that the dragoon moulds are (finally) been released - see their newsletter:                 

Hi Steve, The June Bank Holiday weekend is upon us, combined with Fathers Day on the 16th and the new release of our super Dragoons Mould set inspired us to offer some discounts that will determine how your hobby develops this summer. First and foremost, we have a brand new set of FOUR moulds that offers you the biggest opportunity yet to customise your castings for the armies in the Seven Years War. Dragoons were fielded by most countries and our mould have interchangeable heads to reflect that versatility. Painting /Assembly guides are still in development. There is an early discount of 10% off this new set that expires at noon on Tuesday. The other discounts are part of the June Weekend Sale and include the following: ·     SYW Artillery crew moulds PA3118 and PA3119. ·     SYW Russian Bundle further discounted. ·     PA1240 Napoleonic Starter Kit (54mm). ·     PSK-L Advanced Paint Pack. ·     Solder Melting Pot. ·     Flexi-neck Magnifying Glass. ·     AC-PA2073 Tool Set (Brass Brush, Files and Super Snipper). Sale expires at noon on Tuesday June 4th 2019 GMT+1. No coupons are required. Sale prices are on product pages (strikethrough of older prices can be seen). No minimum order requirements. Go to Prince August's Website ‌ ‌ ‌ ‌

I received a set of 4 moulds today (so no sneak peak this time), which comprises:

1. Officer with Austrian head (as shown)
2. Drummer with Austrian head (as shown)
3. Trooper with Austrian head (not shown - see below)
4. A set of 8 different heads to make other nations & horse grenadiers,  plus an arm for a standard bearer.

The horse/torso are one piece castings, with separate arms, heads and carbine.

The picture is confusing (in fact wrong), the rear figure is the previously released cuirassier, the dragoon is on a similar horse, however the sword is pointing rather than on the shoulder.

As the weather has been fine I have done some casting over the last couple of days, and have cast up enough figure for about 5 units (so that is 30 of the trooper). Initially using my 'scrap metal' I struggled casting the heads, swords and carbine (which are near the top of the mould). However after some venting, and playing around with the elastic bands and clamps I ended up with something like a 90% success rate. (They cast much easier with the Model Metal).

The heads Austrian heads in with the tops of the moulds with the horses and riders, and although they cast pretty much every time, the detail was a little smooth. For the Austrians I have decided to use the officer head from the Russians, which I think is one of the nicest in the range, and is the one I have used on the Karoliner conversions, so there will be some continuity between the two sets of cavalry.

I have a couple of units cleaned up and undercoated and will try and get one painted in the next week or so - the dragoon officer is also going to act as 'brigadiers' until some general staff are available.