Austrian command variations

I've been having a play with the mounted 'general', with a bit if filing around the arm locating lug he can be given the sword from the dragoon officer (the sword should probably be filed down to a more gentlemanly epee), With three arm options, the ability to vary the arm angle, and a variety of heads there is a fair scope for making the commanders for our metal armies.

I have also taken the dragoon officer's horse and body and fitted the bare head and arm with hat from the general. Again the arm needs a bit of filing to make it fit, I decided to have the arm/hat lowered in a sort of respectful greeting - I think it works well. (He needs another coat of varnish - fell over whilst wet!)

Moving on from the mounted officers, I painted up the new foot officer as a dismounted 'general', the new figure is modeled with gaiters, however the buttons can easily filed off to allow cavalry boots to be  painted on - again a nice figure.

With a little more effort it is possible to make a nice bare headed 'general' figure on foot. Cut off the sword and hand just above the cuff , then replace it with the cuffed hand and hat from the mounted officer's arm (I suspect it would work just as well using the hand and hat), and slot in the bare head. He should have a sword in his scabbard so glue on a hilt from a French infantry sword. I think the resulting figure is another cracking officer.

Next I need some commanders for the other armies.

Austrian Command

 The last of the recent batch of moulds - the Mounted Officers.

These are painted to represent Austrian general officers. I have made no attempt to paint the intricate gold lace on the clothing and saddle cloths, as it is beyond my ability/patience, and also would be mostly lost under the high gloss finish (that's my excuse).

I think these are rather splendid gentlemen, worthy to command anyone's armies.

The two arms in the mould allow for waving the hat or pointing with a baton, both very nice poses. I have also been playing with some other options, including the arm pointing with a sword from the dragoon mould. I have tried swapping the other way, adding the arm waving the hat and the bare head on the dragoon officer. None fit perfectly, but look fine with a little filing around the locating lug (I will share them when painted).

The horse/torso is cast in 'scrap' metal, and generally casts OK, however I had difficulty with the heels on the boots, which I built up with 'green stuff', later figures cast with Model Metal were better. The heads and arms are in Model Metal as they give better detail. The hair on the bare head is a bit smooth but paints up fine, the head with the tricorne is from the Russian officer (I really like that head).

I think with the options of mixing and matching arms from this and the dragoon mould, and the wide range of heads from across the whole range , it should be possible to make quite a varied collection of staff officers (someone has to paint a mounted Russian Guard officer).

As always comments and suggestions welcome.

New Releases! Generals and Light Troops

Yes I am still here, however I have not done anything with my semi flats for some time.

I recently had an email to say that PA have (finally) released four more moulds, and that there is a 10% discount if you buy the full set.

I have to confess I have not yet seen these moulds, so have not had chance to try them out and see how they cast. The packaging illustrations are prints of the computer generated designs - not castings.

The moulds are labelled 'Austria', however they are intended to be more generic than has been the case previously, and to produce figures that are 'near enough' to fill some of the gaps that exist across all of the armies. 

General Officer

The mounted general officer is based on the Austrian uniform, with different heads (from other moulds) and varying paint jobs he should do nicely for all of the armies. 

We decided to try and make something a little different from the usual pointing with sword, so went for the raised hat and pointing with baton. Hopefully a dragoon or cuirassier arm can be used if a sword is wanted.

Light Infantry

These have been 'a little while' in the making - looking back through the blog the discussions about what figures to produce were back in September 2014, and then the first sculpting shots were back around Christmas 2019 - no one can say they were rushed out!

Grenz & Pandours

Currently just a single mould for these, the kneeling and standing firing poses are fine for skirmishing. I would have liked to have seen another mould with an advancing pose paired with either one marching or loading - any thoughts?

The mould contains heads for Austrian grenz, Russian pandours and also a mirliton to make the various frei corps units.

The Hungarian officer will stand in nicely for their commander.

 Frei Korps and Jager

Although labelled 'Austria', the second light infantry mould is even more generic, designed to cast figures which will be acceptable  for a wide range of troops; again a single mould with two firing figures. The figure's kit is the same as the Prussian infantry figures, so can be mixed with the earlier moulds (and would make a close order firing line).

Officers can be provided by the line infantry moulds.

The figures have gaiters, so are correct for light troops such as Prussian frei korps, however as they have gaiters they are not quite right for jager (although these are also sometimes shown in gaiters).

The mould includes a head with an Austrian jager style casket, so the figures will also give a reasonable approximation of the Austrian jager, again as they have gaiters they are not quite right .

General Officer on Foot and Hornist

The general officer is intended to be paired with the mounted officer to make a command group, with the two of them having a chat.

The hornist should add a little more variation to the skirmishing lines.

Hopefully I should get the moulds soon and will see how they cast.

As always comments are welcome.

General Officer

Just a quick post to let you know I am still here, and that PA are still slowly progressing the SYW  range😀

General Officer

There have been quite a few requests for a general officer, so PA are proposing to produce one. Rather than the usual sword in hand we thought something a little more interesting might look good, so we went with bare head with his hat in his hand - I think it is rather splendid.

As with the other mounted figures, he will have a separate right arm and swapable  head, so there will also be an alternative with head covered and a baton.

And you can also (hopefully) use an arm from the dragoons to give him a sword in hand (the hilt on the horse would need cutting off which might be fiddly)

If you don't mind the poses being the same you could make some French household cavalry using various arms (sword, trumpet & standard).

Light Infantry

The light infantry are also well underway, there will be standing firing and kneeling firing for both the Grenz & Frei Korps, I will post something when I have more details.



As always feedback would be appreciated.