Pages

Showing posts with label British. Show all posts
Showing posts with label British. Show all posts

Monday 17 July 2023

British Highlanders - Update


Just to show I am still here - a quick update on the release of the Highlanders; according to Prince August these moulds will be released late-July/early-August.

There will be 3 moulds containing what has now become the 'standard' mix of 6 figures, that is:
  • Officer
  • Standard Bearer
  • NCO
  • Musician (bagpipes)
  • Rank and file at march attack and advancing.
Heads will be provided to make figures with either bonnet or bearskin, and the officer and NCO with the option to change weapons.

The illustrations below are not the latest designs, but give a good idea of what is on the way, there have been couple of changes since these were taken:
  • The officers now have a sash over the shoulder
  • The march attack figures left arm has been revised to reposition the hand to hold the musket at the base of the butt.






In view of comments about the kilt; I have added a couple more views showing the belted plaid - it is just not very visible on the images above.




Sunday 19 March 2023

British Highlanders

I understand that PA are planning to go ahead with the British, which will be a useful addition to armies in both the European and North American theatres. The intention is to start with the Highlanders, as these are something a little different.

Do we know if during the SYW, the highlanders operated in close order similar to the rest of the line infantry, or were they sometimes used in more open formations - I ask as it will influence what poses to produce? 

I am not sure if the plan is for 3 or 4 moulds, for now assuming only 3 then I would suggest the 6 figures should be:

  1. Officer
  2. Standard Bearer
  3. Musician
  4. Private advancing

Then another two chosen from:

  • NCO
  • Private at march attack
  • Private standing firing
  • Private kneeling firing
  • Private loading
  • Any other ideas?

Musicians


According to Kronoskaf the highlanders had drummers and pipers - presumably for character a piper would be preferred?










Marching Pose

Is this the correct hand position for British to hold the musket when marching -  it is different to what has been used for the figures in the past?












I have to confess I am not too well read on the British, so more than ever, input from this group would be useful.


Saturday 28 January 2023

British and Hanoverians?

 SYW range - progress so far

After ?&%$ years on the project, with the release of the hussars, the central and eastern theatres are pretty much covered by the moulds released so far. There are however still a few more things I would like to see done to tidy things up:

  • Prussian Cuirassiers. This would need to be a 3 or 4 set collection. PA are unsure if these are different enough to sell - thoughts? (I have used Rossbach figures with SYW heads).
  • Austrian Cuirassiers. I find these too big to use (so I have 3 x 8 man units just sitting in a box - does anyone want to buy them?). I have now replaced them with Karoliners converted with SYW heads. I personally think that PA should reprint them (they are digital) at the correct scale.
  • Dragoon Heads. I find these too small and poorly detailed so do not use them. They are digital so I have asked PA if they can reprint them larger and with more pronounced detail.
  • Artillery in Coats. Currently the artillery are in shirt sleeves to cover all armies (my idea - sorry); it would be nice to have a couple of moulds to produce a generic crew in coats.
Your thoughts would be appreciated.

British and Hanoverian Figures (British)

It has always been known that the lack of British figures left a big hole in the SYW range for western Europe; however the decision was made to have a range which would allow full armies to be produced by adding cavalry, artillery, light troops and staff officers before producing yet more infantry. 
With the release of the hussars, there have been requests on the PA Facebook page for British, and PA seem to be listening (it is always worth asking). I recently had a chat with the sculptor, and it seems PA are thinking of going ahead with some British - so keep commenting on their Facebook page - they do read it!

I think the following might be worth considering:
  • British Infantry in their distinctive coats - perhaps 4 moulds (see below).
  • Highlanders - I will do a separate post to discuss - I think 3 or 4 moulds.
  • Artillery Crew - 2 moulds in coats to to fill gap above.
  • Cavalry - not sure yet???
I will just cover the British Infantry in this post.

Hat Men, Fusiliers and Grenadiers





The illustrations show the typical differences between the hat men and grenadiers at the time of Minden, although there are a lot of variations (for example the hat man's green trousers and stiffened gaiters are an oddity).
The typical differences are:

  • Obviously the tricorn and mitre caps.
  • The grenadier carries a sword, which the line infantry had mostly abandoned.
  • Grenadier coats had shoulder wings (well most did).
  • Grenadiers had the match holder on the shoulder belt.

Some hat men are shown with belly pouches, however most illustrations seem to show them without them.


I think it might be worth having two moulds for the private soldiers, each with an advancing and marching figure as follows:
  • Hat Men, with tricorn, without wings, sword, belly box or match box.
  • Grenadiers with mitre cap, wings, sword, belly box and match box.

For the fusiliers use a grenadier mitre on a hat man torso.

Infantry Stance.

On Kronoskaf there is a sketch and description of the stance of the British infantry, which I have copied below. I would suggest that the 'standard' poses used on the other figures in the range are adopted, modified to 

When shouldering arms, the soldier was to keep his weapon nearly vertical, carried on the left shoulder, barrel facing outward, lock “turned up” and below breast level, with the butt flat against the hip, the weapon pressed against the body with the ball of the thumb. The musket was to be held with the index and thumb ahead of the corner of the stock, with the middle finger on the corner, the other fingers on the bottom of the stock. Soldiers were to stand with shoulders held back, stomach slightly tucked in, chest pressed out, chin up, and the right arm hanging down with the palms facing back. Finally, all but the rightmost man in the line was to have his head cocked to the right. The rightmost man kept his head straight forward. While not stated in any manual, the tricorne was generally worn cocked to one side—typically to the left. This was to allow the weapon to be shouldered, without hitting the hat.




Command Figures

As with the other ranges I suggest an officer,, standard bearer, drummer and NCO. From the illustrations above these are distinctive enough to not allow use of other nations.

Suggested Moulds...............

Mould 1:

  • Officer with  shoulder sash and hand to take partisan, musket or sword.
  • 1 x spontoon for officer
  • Drummer with hanging sleeves
  • 1 x tricorne head
  • 1 x grenadier mitre head

Mould 2

  • Standard Bearer 
  • NCO and hand to take pole arm or musket.
  • NCO musket
  • 1 x tricorne head
  • 1 x mitre cap head

Mould 3 - Hat Men (tricorne) - without sword, belly box, or shoulder wings.

  • Marching torso  
  • Arm for marching
  • Advancing torso
  • 2 x tricorne head

Mould 4 - Grenadiers (mitre cap)  - with sword, shoulder wings, belly box and match box.

  • Marching torso  
  • Arm for marching
  • Advancing torso
  • 2 x mitre cap head

As always feedback would be welcome to help try and get this right.





Friday 26 August 2016

French Infantry Update..............again

Nothing very exiting, just the mould listing for the French infantry, which are sculpted and waiting for packaging design etc.

I have not seen the moulds yet, but they look OK from the images I have.


 Mould 3113 - Infantry in full coat - march attack and advancing


1.  March attack figure
2.  Arm & musket for march attach
3.  Fusilier head - tricorn
4.  Sword
5.  Grenadier head - bearskin
6.  Sword
7.  Advancing figure

(The casting has a groove in the coat to accept the sword, which is fine early war, and for those troops which carry a sword.
If you don't want a sword there might be a bit of work to fill the groove if it doesn't paint over).









Mould 3114  - Infantry in  with coat turned back - march attack and advancing 


1.  March attack figure
2.  Arm & musket for march attach
3.  Fusilier head - tricorn
4.  Bonnet-de-police head
5.  Sword
6.  Fusilier head - tricorn
7.  Sword
8.  Advancing figure











Mould 3115   Drummer and officer


1.  Drummer body
2.  Sword
3.  Fusilier head - tricorn
4.  Officer head  - tricorn
5.  Officer body
6. Grenadier head - bearskin













Mould 3116  Standard Bearer and NCO


1.  NCO body
2.  NCO partisan
3.  Officer bare head  - with curled wig
4.  Grenadier head - tricorn (moustache)
5.  Officer head - tricorn
6.  Standard  bearer  body
7.  Officer's sword












As I said, I haven't got my hands on any of these moulds yet, but they do exist and cast - so hopefully not too long now (have I said that before)!