Austrian Erzherzog Joseph Dragoons

I have just completed my first 8 man unit of dragoons. These are new figures, so as a change from my usual practice of photographing the assembled unit I thought it worthwhile showing the individual figures.

I have painted them up based on Erzherzog Joseph Dragoons, but with some simplification (for example my hand is not steady enough for multiple lines on the saddle cloth). The figures are mostly as in the mould, but with one main change - I have replaced the heads with  older infantry officers heads, with mustache just painted on where appropriate. I did this primarily because I think the older, hand sculpted heads have better definition on the facial features - and also to maintain continuity with the cavalry I have already converted from the Karoliner range.

Trooper

Apart from the Russian officer's head the only other minor change I have made is to fix the carbine a bit lower than the lug/hole suggested.

I think he is a very fine chap, and the mould will get a lot of use (I have cast 30 so far).

Officer

This time with an Austrian officer's head - another nice figure, who is also going to act as 'Brigadiers' in my army proudly taking command of 3 or 4 units.

(I appreciate the officers saddle cloth should be a different colour - however I had already painted it before I remembered and did not feel inclined to change it.)

Drummer

Dragoons had drummers rather than trumpeters, apart from the head (and sword hilt) this is the standard figure.

I'm sure it would look better if I could paint an eagle on the drum - but these are wargames toys not display figures! Also there should be a sword hilt showing which was forgotten by sculptor, I could have easily corrected it using the hilt of of a sword from elsewhere - but I missed it until too late!

Standard Bearer

And finally the standard bearer. There is no actual figure for the standard bearer (we did not think it warranted an additional mould) - instead an extra arm has been provided to convert either the officer or trooper - I chose the trooper as he has a carbine cross belt which looks very similar to the one to carry a standard (there is also a cartridge box on the back).

The trooper and officer both have drawn swords, whereas for the standard bearer it should still be in the scabbard - I just glued on the hilt of a French sword.

Finished Unit

I have now based them up, so here is the completed unit.

Size Comparison

As discussed previously, the cuirassiers are too big, and do not fit in well with the rest of the SYW figures. To bring the dragoons into scale with the rest of the SYW range they have been plotted 7% smaller than the cuirassiers - I have taken some shots as size comparison.

First of all a comparison with the Austrian infantry. Both the infantryman and dragoon measure about 42mm from heel to top of hat - so that looks fine.

Next a comparison with my converted Karoliners. The Karoliner appears marginally larger, although again the men's heights are about the same - I suspect the difference is the larger head on the Karoliners horse. I think they will look fine together, particularly with the same heads on both figures.

And finally the cuirassiers - I checked it, that really is only 7%!

And as requested by Ross - a couple of shots against the old HE with musketoon.

The new figure is a bit larger and bulkier than the old HE, which is in line with the whole of the  SYW range. Note that I have used the Russian officer's head as I like the look of an almost full round head on the semi-flats (just personal taste), however the heads in the moulds are not quite as wide.

Overall Conclusions

The dragoons are really nice figures, I would have preferred something with a bit more energy, but will still be using them for the bulk of my Austrian and Prussian dragoons.

I have a unit part finished which have the sword arm replaced by the one on the shoulder taken from the cuirassiers - it will be interesting to see if the larger arm really shows up?

As always comments would be appreciated.

Frei Corps Loudon

In order to provide the Austrians with some light troops I have painted up a unit of Frei Corps Grun Loudon. (I know they probably did not fight in open order - but until the Grenz moulds are available I wanted something).

For the figures I used the following:

• Officer - Prussian with Russian officers head (I do like that head)
• Standard bearer - Prussian with Russian musketeer head (I did not want a pom-pom)
• Drummer - Prussian (with no arm chevrons (I filed them off of the model I have))
• NCO - Prussian with Russian head and musket.
• Rank and file - Prussian musketeer, as I wanted troops with a sword - plus a Russian musketeers head.

The figures above are in my standard 16 man unit, and are shown in close order. However for skirmishing they are all individually based, and I decided that in that role they should lose the  standard and drummer, so I have replaced them with another NCO, and an officer with musket, using a Russian officer (with the gorget and lapel buttons removed).

Dragoons released

(Updated 01/06/19)

In case you are not on PA's mailing list - they have just announced that the dragoon moulds are (finally) been released - see their newsletter:                 

Hi Steve, The June Bank Holiday weekend is upon us, combined with Fathers Day on the 16th and the new release of our super Dragoons Mould set inspired us to offer some discounts that will determine how your hobby develops this summer. First and foremost, we have a brand new set of FOUR moulds that offers you the biggest opportunity yet to customise your castings for the armies in the Seven Years War. Dragoons were fielded by most countries and our mould have interchangeable heads to reflect that versatility. Painting /Assembly guides are still in development. There is an early discount of 10% off this new set that expires at noon on Tuesday. The other discounts are part of the June Weekend Sale and include the following: ·     SYW Artillery crew moulds PA3118 and PA3119. ·     SYW Russian Bundle further discounted. ·     PA1240 Napoleonic Starter Kit (54mm). ·     PSK-L Advanced Paint Pack. ·     Solder Melting Pot. ·     Flexi-neck Magnifying Glass. ·     AC-PA2073 Tool Set (Brass Brush, Files and Super Snipper). Sale expires at noon on Tuesday June 4th 2019 GMT+1. No coupons are required. Sale prices are on product pages (strikethrough of older prices can be seen). No minimum order requirements. Go to Prince August's Website ‌ ‌ ‌ ‌

I received a set of 4 moulds today (so no sneak peak this time), which comprises:

1. Officer with Austrian head (as shown)
2. Drummer with Austrian head (as shown)
3. Trooper with Austrian head (not shown - see below)
4. A set of 8 different heads to make other nations & horse grenadiers,  plus an arm for a standard bearer.

The horse/torso are one piece castings, with separate arms, heads and carbine.

The picture is confusing (in fact wrong), the rear figure is the previously released cuirassier, the dragoon is on a similar horse, however the sword is pointing rather than on the shoulder.

As the weather has been fine I have done some casting over the last couple of days, and have cast up enough figure for about 5 units (so that is 30 of the trooper). Initially using my 'scrap metal' I struggled casting the heads, swords and carbine (which are near the top of the mould). However after some venting, and playing around with the elastic bands and clamps I ended up with something like a 90% success rate. (They cast much easier with the Model Metal).

The heads Austrian heads in with the tops of the moulds with the horses and riders, and although they cast pretty much every time, the detail was a little smooth. For the Austrians I have decided to use the officer head from the Russians, which I think is one of the nicest in the range, and is the one I have used on the Karoliner conversions, so there will be some continuity between the two sets of cavalry.

I have a couple of units cleaned up and undercoated and will try and get one painted in the next week or so - the dragoon officer is also going to act as 'brigadiers' until some general staff are available.

Austrian "3pdr" - and best wishes for the New Year.

Nothing much has been happening on the 40mm SYW front over the last few months. I am told the plan is to release the dragoons early next year - fingers crossed.

I have however, as suggested in my post back in March (was it really that long ago) had a play at making an Austrian 3pdr battalion gun using the following components:

• Wheels from new SYW range
• Barrel from the Karoliner 6pdr
• Carriage from the Rossbach 12pdr

I then made the following minor modifications:

• Added a cross piece in the trail - not quite correct but looks better.
• Drilled out the holes at the rear of the carriage, which made it look much neater,
• I originally assembled the wheels on the carriage as cast - but they looked too wide. To correct this I narrowed the solid/rectangular axle by about 2mm and then attached the wheels by drilling out 1.5mm holes, and inserting new axles made from the pegs of spare heads.
• Drilled out the end of the barrel.

As discussed in the earlier post, the dimensions are not quite right - however I am happy with the result and will be rearming my Austrians with them (when I start working on them again).

Best wishes to you all for the New Year.

Steve

Yet More Austrian Cuirassiers

Richard Hattersley has now painted the figures to be photographed for the front of the packaging - these are imposing chaps.

He has chosen regiment De Ville, which I was surprised to see had natural leather belts, which makes an interesting change (http://www.kronoskaf.com/syw/index.php?title=De_Ville_Cuirassiers).

Hopefully they will be available soon?

As always comments welcome.

More Austrian Cavalry

Cuirassiers

I have now cast and painted a second 'troop' of cuirassier regiment Maximilian, and also corrected the saddle cloth colours of the officers - which I am advised were blue - they do look quite impressive!

I have also finished a troop of regiment Alt Modena - the only cuirassier regiment in the army with blue facings.  I often play games with non-historical line ups, and it is useful to be able to easily distinguish a unit which may be fighting on the other side.

Before anyone puts me straight - I know the saddle cloth trim is probably incorrect (although there is a suggestion there could have been as shown), however it suits my style, ability and patience.

With respect to the size, I also took a couple of photos of them against the Russian marching infantry, which are the most upright.

They do not look all that out of scale, and horses are fine for cuirassiers, however the riders are too big.

Dragoons

Sculpting of the dragoons is well underway, and the current plan is that there will be an officer, a standard bearer, a drummer and a trooper.

Th original plan was for a trooper and horse in postures similar to to that of the cuirassiers. However I am having second thoughts on this, and think they might look better on a trotting horse for more variety - any thoughts?



As always please keep the comments coming.

Steve Marthinsen's SYW Project

In response to my request for photographs of your projects, Steven Marthinsen has kindly sent me photographs of some of his infantry units.

I also asked him for some background to his SYW project to allow me some text to put with the photos. He sent me quite a long email, which he has agreed I can repeat pretty much in full, - as it gives an insight into why he chose to use the PA moulds, and what else he would like to see.

Steven's email

"My experience with the SYW came straight out of Charles Grant and Prince August.  Charles Grant's 'The Wargame' and his fictional imagination campaign books are just great and tremendous inspiration.  However, the SYW would never have come about without PA because I specifically wanted the toy soldier look for this project.  I already do Napoleonics in15/18mm so really did not need another horse and musket era unless it offered something unique and casting your own armies is certainly that!

I currently have 15 regiments of foot troops painted and based along with 13 guns and crews.  I have one cavalry regiment, hence the reason I have been asking for cavalry molds for so long!  I am excited about the new cuirassiers but do hope they prevent more scale creep within the series.  In general the molds have been well mastered and easy to cast.  I would like to see a remaster of the initial Prussian molds to bring them up to date with the others (buttons on gaiters, better musketeer head and slings on the muskets).  In terms of basic molds for the SYW, we are so close to getting it done I hope that PA recognizes the benefit of having a complete range to offer gamers.  More cuirassier torsos and everybody's dragoons would do nicely to round out the basics.  Hussars, command and light infantry could then be added in the future to really fill it out.  British troops would sell well, especially on your side of the pond, but I would not want those to slow down completing the basic line of European continental armies (but of course I would still buy them!).

I use PA Model Metal exclusively and casting issues have been few, although some are persistent.  I do not believe the hub on the artillery piece wheel has ever fully turned out leaving me to file it down before filling the hole with putty.  The more important thing is that I do get the wheel spokes on a consistent basis so I don't mind filing the hubs.  The pegs on the Russian infantry heads are too thick and each one has to be filed down to fit in the hole.  That is annoying but doable.  The hands for the artillerist with the trail spike are awkward and the fit questionable.  Still, these are essentially minor complaints and overall casting has been quite successful.

Going forward, I have some regular and conversion regiments on the block to paint.  Austrian regiment Puebla used scalloped lacing on their tricornes so I used the Prussian guard head for them.  I created my version of Saxon infantry by using the Austrian musketeer head on the Russian winter infantry body.  Three regiments of French troops are primed and patiently waiting the brush.  Of course, all of this can be interrupted by cavalry molds!

For rules, my original thought was to use The Wargame with half size regiments, and I still might,  However, I recently tried Honours of War and really liked them.  The idea for rules will be to make them fun and not too complicated so players can enjoy the game and retain some of the feel of the old school toy soldiers.

That's it for now but feel free to ask for more pictures or anything else I can do to help with the project.  This really is a unique opportunity for PA and for gamers alike to be able to purchase and cast their own armies.  I realize it is not for everyone but honestly it is a lot of fun and you really do have more investment in the armies when you create them yourself."

Back to me...............

Personally it is great to see how the new range are being used. If there is anyone else out there who would like to contribute to the blog PLEASE send me your photos and thoughts.

'Scale creep' is an issue,  it is one of the many difficulties which has arisen with the change to digital sculpting - hopefully it is being addressed?

I know there are some minor issues with the range, and even after the years spent on this project it is sometimes difficult to 'mould' PA into the mindset of the wargamer - but in general I think we re doing OK.

As always your comments are welcome, I do pass them to the sculptor (who follows this blog), and they are taken into account.

Austrian Cuirassier - completed unit

Painted cuirassier

I have now completed my (the?) first unit of SYW cavalry, in doing so I made a couple of minor modifications relative to the figures as designed:

• The reins have been extended to the hand (they are a bit short in the mould to allow the figures to slot in easily). 
• I have added a sword hilt to the trumpeter and standard bearer, these were cut from a French infantryman's sword.

I painted the coats off-white (Vallejo Ivory Pearl White) - after my visit to the military museum in Vienna I am convinced that is what all of the white should be. It also looks better and also shows off the belting - I will probably try my next infantry the same way.

I have taken photos from 8 angles, so you should get a good idea what the new figures look like.

As with the older ranges, the horse is cast flat in the mould, however being multi part the torso is cast the opposite way, allowing detail on the cuirass.

The sword arm (and head) are also separate, allowing the arm to be well detailed.

The joint between the rider and horse is around the coat tails - but not really visible.

The fit between the arm and torso was a bit tricky and left a small gap, however it filled in fine with paint without the need for any filler.

There is also a separate carbine.

I think the figures look great, and are pretty much what I was hoping for. They are a bit more work than the older ranges, but in my opinion worth it.

Size comparison

As discussed in the previous post, these chaps are a bit on the large side. the horses are OK for a 16 hand cuirassier horse, but the riders are large (I think about 7%).

It only really shows up when the units are very close.

I am advised that the tooling work for the cuirassiers is underway at the factory, and PA have announced a planned release date in June.

The sculpting for the dragoons is also almost complete. I have asked if it is possible to 'plot' these about 7% smaller, this will bring the men into scale, and also reduce the horse from the 16 hands appropriate for the cuirassiers to 15 hands for the dragoons.


As always please let me have any comments/feedback, and I will pass them on to the sculptor to assist in deciding what to do with the next releases. (I will be away from my computer for the next week, so replies will be delayed).